When it comes to cleaning a razor, you might have numerous options to pick. One of the alternative solutions is using non or low toxic chemicals such as vinegar or alcohol.
Accordingly, this raises various concerns about “Can you clean a razor with hydrogen peroxide?”.
Don’t worry. You don’t need to research further because the article below will provide you with a detailed explanation and further valuable tips for your reference.
Let’s check it out now!
- 1 Can You Clean A Razor With Hydrogen Peroxide?
- 2 Basic Understanding Of Hydrogen Peroxide
- 3 3 Steps To Clean A Razor With Hydrogen Peroxide
- 4 FAQs
- 5 Conclusion
Can You Clean A Razor With Hydrogen Peroxide?
Yes, you can clean your razor with hydrogen peroxide (H2O2). Indeed, hydrogen peroxide is a liquid that effectively disinfects residual bacteria and removes all residual dirt. So it can also be used to clean your entire razor.
However, to save and make the most of this substance, rinsing the razor under hot water after shaving is the first step to removing the leftover scream and hair.
Then, use hydrogen peroxide as a disinfectant to dissolve all lingering bacteria. In this way, the liquid can promote its effects.
Basic Understanding Of Hydrogen Peroxide
In the following part, you will acquire fundamental knowledge about hydrogen peroxide, which supports you in using it effectively without further hesitation.
One of the common uses of hydrogen peroxide is to clean skin wounds to get rid of bacteria from minor cuts.
In addition, it is known as an effective disinfectant to inactive various microorganisms and rhinovirus, according to CDC (Centers for Disease Control and Prevention). Accordingly, this magical chemical is an alternative and cost-effective option to sterilize the razor at home.
H202 is a common chemical that you might find everywhere, for instance, in grocery stores or pharmacracy. Generally, it is available in 3% or 6% concentrations. The 3% concentration option might suit your purpose for cleaning razors, enough to destroy lingering bacteria following CDC.
Even though the hydrogen peroxide is non-toxic and relatively safe on its own, it is vital to use it carefully to avoid unwanted side effects below.
First and foremost, be careful to mix H202 with other substances without instruction. The essence of H202 is a chemical, which still leads to a chemical reaction in this case.
Namely, mixing vinegar or chlorine bleach with hydrogen peroxide causes peracetic acid which is harmful to the skin and lungs. Therefore, keep in mind to never mix these chemicals in the same bottle.
Even though H202 is a non-toxic substance, it doesn’t mean that you may use H202 without protection tools (gloves or glasses). Namely, hydrogen peroxide with higher than 3% solution still burns your skin in some cases. As a result, wear gloves and glasses to protect yourself, especially your eyes, when using this substance for cleaning razors.
In addition, it is highly recommended to use H202 in enclosed space to reduce the frequency rate of evaporation.
Last but not least, don’t ingest H202 since even a 3% concentration might cause abnormal distress. Again, this alerts that you should store it appropriately and keep the liquid far away from children or your pets.
H202 is exposed to sunlight or oxygen, leading to reduced effectiveness. Therefore, keep that chemical liquid in an opaque container or brown bottle.
Generally, the hydrogen peroxide should be good to use within 6 months after the opening date. To limit the exposure to heat, light, and air as much as possible, you may estimate the liquid you need for cleaning and stick to it to extract the chemical into the smaller bottles for handy usage. Due to that, you contribute to prolonging the hydrogen peroxide lifespan.
3 Steps To Clean A Razor With Hydrogen Peroxide
If you want to clean your razor with hydrogen peroxide, it is advisable to look at the user instructions below. There are 3 simple steps to guide you clean and sterilize your razor appropriately and safely without hassles.
Remove leftover debris and grime.
The remaining cream and gunk on the blade are significant reasons that reduce the lifespan of a razor. Moreover, it leads to the growth of bacteria. As a result, here are essential steps to remove all debris before sterilizing:
- Rinse the razor under a powerful stream of water after shaving. Using hot water to loosen stubborn debris or messes would be better.
- Carefully remove the blade and rinse the razor again if you want to clean deeply in the backside. Also, you may tap it on the edge of the sink to clean gunk or stuck hair.
- A brush comes in handy to clear out the individual blades. Indeed, you might choose a blade brush available in many stores or supermarkets. Otherwise, taking advantage of an old toothbrush as an alternative solution.
Soak the razor in hydrogen peroxide
Firstly, prepare a container to fill up the hydrogen peroxide, such as a cup or a bowl, which is enough to cover the razor’s head.
Then, gently swish the razor both back and forth in that chemical liquid to clean out any remaining messes. After that, keep the razor submerged for 10 seconds to 1 minute.
Additionally, suppose that the razor has not been in use for a long time; it is essential to soak all the razors in hydrogen peroxide liquid in 5-10 minutes. This thorough treatment allows to wipe out all dried gunk on both blade and the handle.
Keep the razor dry completely
Keeping the razor in a dry and clean environment is critical to extending the razor’s lifespan. The best idea is to separate the razor blade and store it along with the handle in an enclosed case.
After removing all build-up and cleaning it thoroughly, put the razor in open spaces to dry the air. It is advisable to leave it in a well-ventilated place for approaching constant airflow.
Plus, don’t put it on the edge of the sink or directly on wet or humid space in the bathroom, leading to the accumulation of bacteria and increasing the possibility of rusty blades quickly.
Instead, you prop it in a cup in your bathroom or kitchen. Furthermore, avoid using a towel to wipe the razor, which leads to damage.
Besides, don’t forget to check the usage of blades for smoother shave and sanitation. Ideally, you may change the blades after 5-10 shaves, but this general rule is adjusted according to the density of your hair.
Can I clean my electric razor with hydrogen peroxide?
Yes, there is no wrong with using hydrogen peroxide to clean an electric razor. However, it is vital to keep in mind to turn off the share and disconnect it with the power outlet.
Furthermore, there is a proper cleaning method depending on what kind of razor you use. It is necessary to read the manual before cleaning it.
In addition, you can also clean your electric razor with alcohol.
Is hydrogen peroxide the same thing as alcohol to sterilize a razor?
Yes, alcohol is an alternative option to clean and sterilize a razor. Unlike non-toxic H202, the alcohol includes low toxicity and is known as one of the most pronounced bactericidal effects.
In particular, it is excellent for anti-bacteria such as staph or E.coli within 10 seconds. H202 has the same role in killing germs but takes you more time to complete the jobs, generally up to 5 minutes.
In brief, both alcohol and hydrogen peroxide are great options for cleaning and disinfecting the razor. Accordingly, these substances are interchangeable at will.
How do you disinfect the razor without using chemical disinfectant?
If you find it complex to prepare disinfectants for sterilizing razors, you may take advantage of natural disinfectants available at your home, for instance, vinegar.
Otherwise, simply use hot water in lieu. For example, rinsing the razor thoroughly under hot water streaming also sterilizes blades and dissolves stubborn messes during the shave effectively.
Along with other cleaning options such as vinegar or alcohol, hydrogen peroxide is also an effective option you should consider to clean your razor.
It is remarkably effective in disinfection after cleaning your razor with hot water. In addition, H202 is non-toxic and friendly to use without needed protection tools with one lower than 3% concentration.
Hopefully, the question of whether a razor is cleaned with hydrogen peroxide will no longer challenge you more.
Besides, if you have any further questions or suggestions about other cleaning razor tips, feel free to share and drop a comment below. Also, should you find the article helpful, don’t forget to share it with your friends and relatives.