Can You Shave With Just Water? – Tips To Shave Without Other Skin Lubricants

The annoying hairs are bothering you, and you don’t have any products to help get rid of them? Click here to find out can you shave with just water and how to do it! 

Periodic hair removal is something that many people care about. This is aesthetically pleasing, as many people feel more confident about their bodies when their hair is cleanly shaved. 

However, this requires proper knowledge of hair removal methods, and many questions arise from this. Many people may ask what the best products to use for hair removal are, while others wonder what the best method is. 

There is no best way for everyone’s conditions and preferences to be different, only the most suitable way for each one.

In this article, we will answer the question: can you shave with just water, also, provide some tips to shave without any foam or lotion.

Can You Shave With Just Water? 

Shaving cream, foam, or similar products are intended to make shaving easier. They soften and lubricate your hair, acting as a protective and moisturizing barrier. This keeps the razor from leaving cuts on your skin and keeps it moist.

 Shaving cream plays a huge role in the shaving process
Shaving cream plays a huge role in the shaving process

This means that products that help just make your shaving process easier and minimize damage to your skin. In addition, they also help you shave closer. 

Lee's Razors
Lee's Razors

However, shaving with just water helps you save the cost of spending on all these products. For those who are allergic to shaving products, it might be the only option. But in general, it’s not recommended to do so because it also comes with a few drawbacks.

Is It Better To Shave With Only Water?

Between dry shaving and wet shaving using only water, the latter is much more preferential. 

Without any layer of lubricant, dry shaving leaves your skin feeling burned, dry, and damaged in the long run. If you don’t have any product, water alone is still a good option.

Compared to using skin lubricants for support, however, shaving only with aqua will expose you to more risks. 

You need to be extra careful and watch where your blade is going since there is no extra protection layer. Furthermore, water alone lacks the skin support that shaving products offer. 

Shaving foam and soap act as lubricants to smooth the process and protect your skin. They work to minimize friction, thus reducing the risk of redness and skin irritation. They also ensure fewer cuts than water alone.

An extra bonus to using these products is they usually come with a pleasant aftershave fragrance that leaves you feeling refreshed. Most shaving products also have a moisturizing effect along with other skin-pampering components that will nourish your skin.

Alternatives To Use When You Don’t Have Shaving Products

If you ever find yourself without a proper shaving product or if you are allergic, you don’t have to consider dry-shaving or using water just yet. The key is to find other products that also offer hydration that can lubricate and soothe your skin. Take a look around and see if these alternatives are available:

  • Hair conditioner
  • Skin oil such as baby oil, coconut oil, or olive oil
  • Cream-based skin products like body lotion
  • Aloe vera gel

Soap and shower gels are also used frequently, however, note that they can be quite slippery and dull your blade over time because they don’t wash off easily. 

Certain household ingredients should be avoided, like honey, avocado, or peanut butter because they can either cause unwanted rashes or just become extremely messy on your face. 

When To Use Hot And Cold Water During Shaving

Cold water can bring great benefits to your skin
Cold water can bring great benefits to your skin

The use of aqua will help open the hair’s cuticle and make it softer.

Use warm water before you shave so that the hair will stand up. This will make your process a lot easier and also avoid accidental skin nickings. Warm water will also open up your pores, which helps to avoid ingrown hairs.

Cold water, on the other hand, can be used afterwards. Combine it with lotion when you are done to lock in the moisture and prevent harmful germs from infesting your skin.  

Cold water also keeps your skin from becoming too soft and vulnerable. As a result, you will avoid the risk of skin irritation and burns while getting rid of the hair. 

Hot water, however, might aggravate acne, so if you have acne-prone skin, stick to cold water.

How To Shave Using Only A Razor And Water?

It sounds horrible, but in reality, shaving with water alone is not as risky as you think. On the contrary, it is as simple as you just need to follow these steps closely:


Before proceeding to get rid of obnoxious hairs, prepare carefully for the process. Here’s what you need before you get started:

  • Razor: Make sure that you get yourself a razor that really works. It should be comfortable to hold and sharp enough to be able to remove hairs smoothly. A disposable razor is preferred, because the water can cause the blade to oxidize quicker, so you should only use it a few times. 
  • Hygiene: Consider and opt for a suitable razor. Once you’ve done choosing, check it again to make sure it’s clean and doesn’t have any hair on the blade. Make sure the blade won’t clog to avoid scratching your skin.

To be sure, you can clean the blade by rinsing it under running water. You can also clean it using a cloth or a small brush.

Besides, find a clean place for shaving. A clean environment will ensure you don’t get bacteria in your pores. Therefore, clean your space thoroughly as you deal with open pores.

  • Sharpness: You’ll want your blade to be sharp enough to work smoothly. Trust me; a dull blade will put you at high risk of injury and even more time-consuming. To be sure, check the sharpness of the blade using the methods below: 
  1. Test with a section of hair to test the sharpness of the razor. Count the strokes, as a sharp blade will not take too many for a clean shave, only about 1 or 2 times. 
  2. Tap and drag across the blade gently with your thumbpad. Feel at the edge, and you’ll know a blade is sharp if you have a sticky feel. It’s important to do it lightly enough not to injure yourself.
  3. A quicker way to check is to use the wet thumbnail. Feel the blade as you pull it along the edge of the blade lightly. It won’t be as precise as you’ll have to rely on your feeling, but it can be done quickly.
  • Exfoliation: If you want to remove as much hair as possible, don’t skimp on exfoliating your skin. This will help get rid of dead cells that clog pores. It exposes more hair follicles as well, and you will shave them easily.
You can easily exfoliate your skin with homemade ingredients
You can easily exfoliate your skin with homemade ingredients


Wet the area you want to shave with water. Apply enough force to the razor to remove hair at the hair follicle. Tilt the blade 45 degrees to the skin and make a few short strokes in the direction of hair growth.

Start at the flattest part of your face with short and smooth strokes. This will give you better precision while also limiting the ingrown hairs and rashes. 

Do the shaving on the easy and flat parts first, then work on the hard parts afterward. Use your fingers to stretch the skin for an easier shave. In between each shave, clean the blade under the tap to ensure that subsequent shaves remain smooth.

Since there’s no shaving foam to mark, you’ll probably have to shave some places twice. So don’t be afraid to go through the same spot over and over again until you get the smooth shave as desired. 


Your skin tends to become very sensitive and vulnerable aftershave, which is why it is important to treat it with care. 

You can start rinsing your face thoroughly with warm water first to remove any remaining fluff. Then wash the shaved area with cold water to help shrink pores and calm the skin. 

Dry the skin by patting it gently with a cloth or towel. Remember not to rub it to avoid irritation and disturbing any minor injuries you may have obtained during the shaving process. 

The last step is to use lotion or aloe vera cream to soothe and moisturize the area where the hair has been removed. If you accidentally nicked or cut yourself, apply a stypic pencil or an alum block to stop the bleeding. 

Top Tips For Shaving With Just Water

Before you shave, aside from splashing your face, you can also cover the area with a washcloth soaked in warm water. You can also take advantage of a showerhead’s stream. This can all help open up the hair follicles and make your process a lot easier. 

Choose a razor that is sharp and easy to hold. You’re already shaving without a lubricant, so make sure to choose a blade that you won’t need to apply too much pressure to. 

Shaving with just water requires extra carefulness, which is why you shouldn’t push the blade too hard against the skin. This also means you should shave with the grain of your hair, instead of against it for a closer shave like normal. 

Unclog your blade between the strokes by rinsing it under running water. This will make the process go a lot smoother and you won’t need to apply too much pressure.

Make sure that your face is always wet. Since water is the only source of lubrication, it is better to keep things moist for easier access. If you feel your skin drying up, reapply water every now and then. 

Frequently Asked Questions

What Problems Could Come From Shaving With Just Water?

Common problems that you might encounter include skin irritation, razor burns, bumps, skin nicks or cuts, and so on. These are issues you could have with other methods as well, but when shaving with just water, the possibility increases so you need to be extra careful.

How To Prevent Razor Bumps When Shaving With Just Water? 

Razor bumps can be prevented with the following tips:

  • Make sure to moisten your skin with water and mild soap to soften the hair and open the pores.
  • Don’t stretch your skin too hard.
  • Shave in the hair’s growing direction
  • After you shave, rinse with cold water and use a moisturizing cream.

Should You Shave With Cold Or Hot Water?

It all depends on your personal preferences. Some men like the feeling of cold water while others are comfortable with lukewarm. 

However, during the shaving process, it is recommended that you use warm water as it will open up the hair follicles and ease the strokes. If you want to find out what is right, experiment and find out for yourself.

Many consider shaving cream to be an absolute essential 
Many consider shaving cream to be an absolute essential

Can You Shave Your Face With Just Water?

If you don’t have any other options, you can use water. Remember to wash your face with warm water to open the hair follicles and use a sharp razor with slow strokes. 

However, it is worth noting that facial skin is a delicate and sensitive area. Be extra careful when shaving with only aqua. In most cases, if not reluctantly, we advise against doing so.


Above is the answer to the question, can you shave with just water. Plus, there’s a tutorial for you to shave using just water and a razor to practice when needed. 

For safety reasons, creams, shaving foams, or similar products are recommended. Furthermore, do not use this method if you do not have the required skills when using a razor. Otherwise, it won’t be safe enough for you to opt for this method!

Lee Cantor

Provide the best shaving product reviews and shaving advices to the wetshaving community and friends.

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Posts