Can’t figure out the differences between Mach3 vs Mach3 Turbo razors? If you want to know which one is better, today’s article will clear your path.
The comparison of Mach 3 vs Mach3 Turbo has always been a controversial topic among manscape lovers.
Indeed, there has been no specific answer to the question of which one is better. That’s why we’ve taken on the journey and hand-tested these products ourselves.
If you also want to take a closer look into these 2 amazing products, keep on reading.
Introduction of Gillette Mach3 & Gillette Mach3 Turbo
1. Gillette Mach3 razor
Even though Gillette Mach 3 is the cheapest in the Gillette Mach 3 family, it doesn’t imply any highlights’ lack. So, to begin with, let’s take a good look at Mach 3’s features.
First and foremost, its ergonomic structure undoubtedly allows for more comfortable grooming compared to what a standard throwaway blade would give.
Owing to its intuitive construction, which directs the blade to execute the work efficiently, even in problematic places, this razor deserves recognition.
The Mach 3 unit’s durability, at the same time, is also something other rivals should watch for, especially when the product is super affordable.
Indeed, on average, one blade can groom for around 15 sessions. Of course, the longevity may change depending on how much hair you want to remove, but with proper grooming routines, a standard Mach 3 razor should serve for a couple of weeks.
Robust material and blade system
One of the razor’s most notable features is its three-blade technology, equipped with a skin-protecting lubricating layer and mini fins.
In detail, Mach3’s top razor elevates your hair, while the 2nd and 3rd ones glide into them smoothly and remove the strands.
Moreover, according to Gillette, the Mach 3 blades’ materials are more robust than steel while providing excellent hair traction. Indeed, its DuraComfort edges boast a firmer grip on your hair.
The lube band also serves as a noticeable aid throughout the grooming procedure. By providing hydration to the desired region post-shaving, this skin-soothing patch reduces the risk of any leftover inflammation or dehydration.
The microfin skin protector provides an excellent base that stretches your skin and prepares it for grooming. This pulling motion makes it easy to glide over your hair and display the most strands before the sweep is over.
The microfin construction is likewise pliable and lasts the same as the moisturizing sheet on the other tip.
- Durable razor materials (tougher than steel).
- Hydrating lube patch that minimizes the risk of skin damages.
- Skin-protecting microfin protector for extra safety.
- Handy construction with extra ergonomy that boosts users’ ease of control.
- No anti-traction feature on the blades.
2. Gillette Mach3 Turbo razor
You can’t hold a comparison of the Gillette Mach3 Turbo vs Gillette Mach3 without discussing both products, so let’s carry on with the Mach3 Turbo.
Although the layout is identical to Mach3, the Mach3 Turbo is unique in many aspects.
Comfortable triple-blade design
As a result of the Dura Comfort 3-blade technology, the Gillette Mach 3 Turbo has excellent hair grooming performance.
Also, this unit glides easily over even the thickest facial beard owing to its moisturizing band on the upper and mini fins on foot.
Although many people believe that compared to Mach3, Mach3 Turbo’s razors are even more acute, the razor material in both examples is sturdier than steel, according to Gillette.
Its blade’s razor-sharp construction also promises that even the toughest and thinnest beard would disappear within the fewest tries.
You may also utilize this to remove fine strands from vulnerable spots without giving a great deal of pressure.
The featherweight build also makes it easier for you to grasp onto the grip.
In addition, the top lubricating band makes the blade more pleasant to use. Indeed, this lube band delivers enjoyable protection for your skin during shaving, preventing any future inflammation.
Moreover, there is a slight difference between Mach3 and the sheet regarding size, which we will tackle in the following section. The microfin skin protection on the underside also contributes to a more comfortable grooming experience.
While the cover does pull the skin outward for better exposure to the strands, it also features additional fins compared to Mach3.
These additional fins provide a more accurate uplifting movement, allowing users to remove hair in even the most problematic areas.
- Sharp triple turbo shaving razors.
- Anti-traction coating on the razors.
- Skin-friendly and user-protecting micro fins and moisturizer strips.
- Comfortable handle and ergonomic design.
The Similarities Between Mach3 And Mach3 Turbo Models
3-razor design for better shaving
These products all feature 3 razors. And with a triple-cutting setup, you will go with a precise, smooth shave.
Moreover, these sharp razors are also spring-mounted, which allows the units to adapt to skin differences immediately.
In this case, both units also employ identical lifting and cutting techniques. As soon as the hair gets lifted, the 2nd and 3rd razors will go in and remove all the strands.
Because of the slots between the edges, these blades are less likely to get blocked with fuzz or bubbles, making them highly effortless to clean.
How can we end up with zero blade marks despite shaving so close to the face? Dermal covers (or so-called micro fins) that shield the surface are the straight answer.
As mentioned earlier, both Mach 3 and Mach 3 Turbo shaver heads include these pliable plastic micro fins at their bottom.
In general, the Mach 3 and Mach 3 Turbo blade’s microfin technology pulls and uplifts your skin, revealing additional hidden hair strands.
As a result, users can quickly achieve a neat and uniform shave while the risk of hair getting entangled in any facial creases is negligible.
A comfort bar
Both versions come with a comfort bar on the upper edge. As its name stated, this bar provides your face with a pleasant feel that leaves your skin soothed.
As this band conforms to the skin, the danger of shaving irritation decreases. In addition, every bar contains lubricants to protect your skin from becoming too dehydrated following grooming. As a result, it minimizes the chance of razor burn and rough or cracked skin.
You could install both of these blades on almost every Mach 3 grip you choose. For additional compatibility on all Mach 3 handles, all blade tips feature identical connectors.
Most Gillette shaver grips possess grooved gripping areas to provide a non-slip grasp on the blades. As a result, this handle’s curved design also delivers a powerful hold that accommodates your hand any time you utilize it.
Gillette has designed every one of these Mach3 and Mach3 Turbo blades to endure 10 or more cleanings. In addition, as the manufacturer claimed, these razors are of materials that are more robust and durable than steel.
But how do you know when these things should go into the bin?
When the lubricant band on top isn’t performing as well as it should, it’s time to replace the unit. Regularly inspect the condition of the band to determine whether or not it calls for replacement.
The Differences Between Mach3 Vs Mach3 Turbo Razors
Although both devices feature microfin protection on the underside, the Mach 3 Turbo’s cover comes with a sturdier structure. They also have additional fins that improve the users’ comfort.
As a result, these razors pull smaller portions of the face, resulting in an excellent shave any time you utilize it.
In numbers, on Mach3 Razor, you’ll find 5 micro fins, which is half the quantity (10) spotted on Mach3 Turbo.
Lube strips provide a significant boost to dermal hydration preservation. When using a multi-blade shaver (like the Mach3 or Mach3 Turbo) that slices close to the surface, the water might get sucked out, leading to dehydration and excessive resistance.
That’s why both blades have a moisturizing band. This little strip helps to maintain the skin moisture and minimizes inflammation. However, this band will be somewhat more extensive in the Mach3 Turbo blade.
Furthermore, in Mach3 Turbo, those bands function as an indication. Indeed, they change from green to white during usage, signifying that it’s time to replace the blades.
Meanwhile, these hydrating patches also include Aloe Vera in their component, which delivers a calming scent and will make your skin feeling fresh.
When it comes to the shaving razors, the classic Mach3 Turbo employs powerful Turbo trimming edges, which are more acute than the standard Mach3.
When cutting, the cartridges provide a more precise shave while removing undesired hair quickly. Additionally, each razor has an anti-friction coating.
As a result of these layers, resistance is pretty much out of the way, and the razor moves smoother, allowing it to slide over the skin easily. These new protective coatings will extend the life of the blades by preventing degradation, too.
In general, Mach3 might provide a somewhat more effortless shave compared to the Mach3 Turbo. The original Mach 3’s thinner covering lowers the actual width of the blade tip, guaranteeing that the shave you get is simpler to master.
That’s our complete Mach3 vs Mach3 Turbo showdown. Now, we bet you’ve completely understood the similarities and differences between these 2 models.
In the end, which one is more suitable is totally up to you. If you call for a closer shave and extra ease of control, the Mach3 is ideal for you. However, if you need sharper razors with extra micro fins, go for Mach3 Turbo.
Whatever it is, both products are excellent. So give them a whirl, and you won’t be disappointed.
Leave a Reply