How To Clean Hair Clippers (3-Simple-Step Guide)

You want to clean your hair clippers after some usage but don’t know how to do so? Find our 3-step guide on how to clean hair clippers here! 

Since a dirty and dull blade only brings about undesirable irritation and pain, your hair clipper needs cleaning after specific usages. But, despite mastering the method utilized to maintain your shavers, you may not have any concrete grasp of know-how related to hair clippers, thus wondering: How should I practice cleaning my hair clipper properly?

Check out and follow our 4-simple-step guide on how to clean hair clippers below. You will no longer find this a challenge. 

clean your hair clippers
clean your hair clippers

Things You Need Before Cleaning Your Hair Clippers 

Without a doubt, it is wise to prepare some necessary equipment and products prior to cleaning your hair clippers.

These include a brush to remove excess hair, a cleaning agent to eliminate all the invisible bacteria, and some lubricating oil to sharpen your clippers’ blades. 

A brush 

Good hair clippers usually come with a small cleaning brush. So, if you already have one attached, feel free to take advantage of them! A toothbrush or makeup brush can also come in handy. As long as they are sturdy and small, they can quickly get in among the nooks and crannies to remove all the tiny hair and debris. 

Under some other circumstances, for example, if so much hair is stuck in your clippers, you may also choose a clothes brush to clear off the enormous bulk of the hair more quickly. Then, you can utilize a tiny brush to work with the leftover debris. 

Lee's Razors
Lee's Razors

If you prefer something more professional and dedicated to just clipper cleaning, there are some decent options on Amazon for your further references.

A cleaning agent 

You cannot clean something well without using a cleaning agent. Of course, you can purchase some professional cleaning liquid utilized for clipper blades. As designed to not only clean but also to deodorize and lubricate the blade, they can be beneficial to get rid of all the invisible bacteria or debris. 

Nevertheless, you may also consider using a combination of white vinegar and water. Often referred to as an all-natural cleaner, white vinegar is widely used to polish the sinks, the shower, as well as other surfaces in the kitchen or bathroom. In addition, this chemical usually serves as an alternative to removing all the dirt, surfaces’ germs, and debris.

Thus, the mixture of water and vinegar can be your lifesaver some days when you cannot go out to buy some real cleaning agents.  

Lubricant oil 

Lubricant oil 
Lubricant oil is crucial to your clipping maintenance process.

In addition to those two crucial products mentioned above, you should prepare some lubricant oil in advance since your blades should be clean and lubricated. Lubricated clipper blades can significantly reduce damage from air, friction, and moisture, so they can remain like-new even when time has passed. In addition, you will refrain from tugging or pulling due to dull blades. 

In case you do not want to invest in this, there are some feasible alternatives to lubricant oil that you should check out and think of a possible substitute available at home:

  • Mineral Oil.
  • Baby Oil.

Sanitizing spray/liquid

Lastly, if you want to ensure that your clipper is hygienic, consider buying a sterilization spray or taking advantage of rubbing alcohol.

As rubbing alcohol has the superpower to kill germs and bacteria, it can be even more effective in sanitizing your clipper compared to other professional sprayers.

Yet, it is less convenient than the sprayers since you have to utilize a towel to clean the clippers. So, be wise to choose the most suitable option for yourself! 

Related: How To Clean Electric Razor With Alcohol?

How To Clean Hair Clippers: The 3 Simple Steps 

Now when you have all the necessary equipment ready, it is time to start cleaning your clippers. Just read, then carefully follow our three simple steps below. You will find that mastering these cleaning techniques is not a big deal at all! 

Step 1: Remove your hair

Since you will not want to hurt yourself accidentally, before removing hair from the clipper, remember to unplug your clipper from the outlet and turn off the power of clipper. Then, move near to the trash can or spread a towel on your bathroom sink so that these containers can help you store the excessive hair. 

Now, you can start detaching the comb guide away from the clipper. Once done, utilize the brush to brush away all the excess hair leftover inside the comb guide and between the blade.

At this step, if you own those clippers with detachable blades, you should follow the manual to separate the blades from the main units before working with the hair. 

Although people also opt for a towel or some fibrous materials to deal with this step, it is vital to emphasize that many experts have recommended not to do so. This is because these fibers may accidentally get stuck in between the blades, which can cause other unwanted issues. Hence, you should only stick to some kinds of brushes mentioned above instead.  

When you have finished brushing all the hair, leave the blades and the clipper head in a bowl filled with warm water. This will help you to get rid of the tiny hair residue more easily.  

Step 2: Clean the comb guides

As you have removed all the hair, it is time to begin cleaning the comb guides.

At this step, you should take the comb guides detached or other attachments from the clippers and put them into a gentle cleansing agent and warm water mixture. Then, wash them carefully until they are clean. 

Detach the comb guide to start cleaning it
Detach the comb guide to start cleaning it.

Several people also choose to pour a cleanser over the comb guides, then wash and rinse them under warm water. Both of these practices work well. Thus, choose the method that suits your likings the most. 

It is suggested that after cleaning the comb guides, you should leave them dry under the sun or allow them to air-dry by placing these guides on a towel overnight. Don’t just utilize these guides after cleaning since wet comb guides may negatively impact the clippers’ performance. 

After everything is dry, you should observe your guides’ conditions before attaching them back to the handle. If they are worn or torn out, you may consider replacing them with new ones. 

Besides the comb guides, you should use rubbing alcohol to sanitize the blades as long as you can take them out of the machine. In case that they do not work that way, take advantage of the cleaning sprayer instead. They will help sterilize your blades without detaching the blades. 

Now, put all the parts together and get ready for the next step. 

Step 3: Lubricate your clipper’s blades 

When you have finished reassembling your clippers, switch them on to prepare for the lubrication step.

Now, add at most two drops of oil to the blades. Since the oil only works for the moving parts of the blade, it is crucial to put the oil along the rails, under the cutter. After that, you can slide the cutter a bit to ensure that the lubricant oil has been applied to the correct part.

Now, leave the clipper run for a few seconds. This will help the oil to spread out all around the blades evenly. After that, turn off your clipper and wipe off the excess oil from the blade. 

When you are at this last step, remember to pay much attention to the amount of oil applied. If you pour more than two drops, there is a high possibility that you will overfill the oil, gradually destroying the clipper engine. 

This whole process, from cleaning the clipper appropriately to oiling the blades, is of great importance to maintain your clipper’s excellent performance.

Thus, don’t forget to brush the grime around the motor, clear off all the dirt, hair residue as well as oil the blade on a regular basis. You will definitely experience a better clipping in the future. 

Why Should You Clean Your Hair Clippers? 

Everyone knows that we need a clean clipper to have a great hairstyle and a smooth shaving experience. But, besides maintaining proper hygiene, a clean clipper also ensures you the best clipping results.

Consequently, you will not only gain a stunning hairstyle but also refrain from potential cuts, nicks, irritation, and razor bumps. 

Moreover, cleaning your clippers also prolongs their lifespans. As grease or excess hair built up can ruin the performance of the comb guides and blades impressively, you should never let them stay in your clippers for too long. 

Clean Your Hair Clippers
Don’t forget to clean your hair clippers!

How Often Should You Clean Hair Clippers? 

The frequency of your clipper cleaning mostly depends on how often you take care of your hair. Nevertheless, experts have suggested that you clean it at least once a week or after three to four uses. 

Also, you should practice cleaning it the right way. If you utilize the wrong brush, for example, a hard toothbrush, it may damage your clipper.

Can You Use Peroxide To Clean Clippers? 

Yes, definitely. Hydrogen peroxide takes advantage of the oxidation process to kill germs and bacteria. Thus, a lot of people have used it to clean personal care tools, such as nail clippers, hair clippers, and combs.

You just need to let them stay in the liquid for some minutes. Then, all the unhygienic organs will fade away.

Final Thoughts

To sum up, it is pretty simple to take care of your hair clippers. You just need to follow our 3-step guide on cleaning hair clippers and spend some time washing them after every four uses

 A clean, hygienic clipper will lift your clipping experience to the next level and ensure a good look for your upcoming date! 

Lee Cantor

Provide the best shaving product reviews and shaving advices to the wetshaving community and friends.

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Posts